销售在线
产品详情
In very cold temperatures, condensate may run the risk of freezing when it does not continuously flow through the system.
The DRAIN HEATER guarantees a continuous condensate flow in all systems where you have trouble keeping the condensate flowing due to extreme cold weathers.
The DRAIN HEATER can be installed on the KAPTIV-CS, MAGY and NUFORS-CR models.
Please note; if the pipework leading up to and leading from the drain is insulated, then the drain will typically not require any anti-freezing device. JORC drains are produced from materials that will operate in extreem cold weather conditions. Often the desire to apply anti-freezing devices on drains is derived from situations wherein competitive product experiences have formed a mind-set.
SPECIFICATIONS
| VOLTAGE SUPPLY | 230VAC or 115VAC |
| POWER CONSUMPTION 230V | 0,5A |
| POWER CONSUMPTION 115V | 1,1A |
| MAX. PRESSURE | 30 Bar |
| THREAD SIZE | 1/2" BSP or NPT |
| HEX. SIZE | 32mm |
| CABLE LENGTH | 2 meters |
| HOUSING MATERIAL | Brass and Stainless steel |
| ENVIRONMENTAL PROTECTION | IP65 (NEMA4) |
| THERMOSTAT BODY | <+5 °C ON / >+15 °C OFF |
| THERMOSTAT HEAD | <+40 °C ON / >+65 °C OFF |
| APPLICABLE TEMPERATURE | -25 °C / +5 °C |
| APPLIANCE CLASS | 1 (earth) |
FEATURES
The DRAIN HEATER applied on the MAGY.
The DRAIN HEATER applied on the KAPTIV-CS.
The DRAIN HEATER applied on the NUFORS-CR.
- The DRAIN HEATER prevents freezing up of the level sensed drains in extreme cold conditions.
评价